Tööriist Cyclus Tools for disc brake mount facing IS2000/PostMount/FlatMount dual (720236)

Cyclus Tools develops and produces top quality tools for professional bicycle repair shops, but of course it’s also appropriated for hobby technicians. Produced in Europe, these durable tools are permanently proofed by our quality checks. With furnitures for your workshop or cosmetic care products the portfolio is rounded off very well. For every problem Cyclus Tools offers solutions. Cyclus Tools counts among the leading manufacturers of tools for bicycles. To stay at the top we continuously enhance our products for today’s fast changing conditions. The dual disc mount facing tool can be used universally by simply changing the facer and clamping position. It mills 100% even, at a 90° angle. The exact 90 ° angle and the parallelism of the disc brake mounts are ensured by the fact that the facer is clamped only once and both disc brake mounts are milled simultaneously. This is the only way to guarantee an absolutely identical milling depth, which is a prerequisite for the correct assembly and proper functioning of the disc brake. Before you clamp the face milling machine, you must check the parallelism of the dropouts, as only then a perfect milling of the disc brake mount is guaranteed. · The tool is delivered in the standard configuration for the quick release (QR) and 20 mm thru axle. NB: an adapter is needed to use the face milling tool with a 12 mm or 15 mm thru axle, that is Cyclus Tools art. 720962 · This tool comes with a facer pair Flat Mount (spare parts): art. 720958 Flat Mount Front for front disc brake / front brake caliper mount according to flat mount standard Flat Mount Rear for rear-wheel disc brake / rear brake caliper mount according to flat mount standard Post Mount for disc brake / caliper mount according to postmount standard Diameter of the brake disc 140-203 mm (nominal size: 5-8 inches) International Standard 2000 (IS2000) for disc brake / caliper mount according to IS2000 standard Diameter of the brake disc 140-203 mm Optional accessories: Optionales Zubehör: CYCLUS TOOLS milling cutter pair (Ų 12 mm, height 15 mm) Art. 720237 milling cutter pair with carbide plates for carbon fibre Art.-Nr. 720238 guide for quick release (QR) VR Art.Nr. 720960 Guide for quick release (QR) HR Art.Nr. 720961