0zł
e-hind
Võrdle
Litrid CeramicSpeed for SRAM 11s 1X Force 1/Rival 1/XX1/X01/CX1 off-road Titanium Coated 26 Coated (101712)

Litrid CeramicSpeed for SRAM 11s 1X Force 1/Rival 1/XX1/X01/CX1 off-road Titanium Coated 26 Coated (101712)

Toote kood: CER101712
Küsi toote kohta
close
Tootepäring
 
Kirjeldus - Litrid CeramicSpeed for SRAM 11s 1X Force 1/Rival 1/XX1/X01/CX1 off-road Titanium Coated 26 Coated (101712)
This titanium version of the Pulley Wheels for SRAM’s 1x 11-speed rear derailleurs offers an ultra long life due to the extreme durability of titanium and coated bearings. The precision machined titanium symmetrical narrow-wide profile ensures stable chain retention, crisp shifting, and is highly efficient. They work with less mechanical friction, adding to the power transmitted to the rear wheel. They also possess greater durability, going longer between replacement intervals. CeramicSpeed Standard Ceramic Bearings - low friction, high durabilityBearing race material: hardened-steelCompatible with all 11-speed SRAM derailleurs: Force CX1, Force 1, Rival 1, XX1 MTB, X01 MTBPulley material: TitaniumBearing type: 626In the box:2 x 12-tooth pulley wheelsCeramicSpeed Oil for Pulley Wheel Bearings, 15ml dropper bottleSticker sheetRELATED TECHNICAL INFORMATION:LIFETIME Warranty of CeramicSpeed Coated Bearings - All CeramicSpeed COATED products are covered by a lifetime* warranty! *PLEASE READ WARRANTY TERMS & CONDITIONS here: https://www.ceramicspeed.com/en/cycling/support/warranty-program/lifetime-warranty-terms-and-conditions CeramicSpeed COATED Ceramic Bearings - Like all CeramicSpeed Bearings, our coated products are handbuilt in Denmark. Building a coated bearing adds a number of extra steps to the process. The CeramicSpeed balls and steel races are matched to the micron after which, each set of races is coated. The races are kept together in pairs through the entire process and after coating, each set needs to pass the quality control before they go into production. CeramicSpeed’s coated products offer the ultimate gains in performance and longevity. The unique coating features several attributes that improve the longevity of CeramicSpeed Bearings. The increased hardness of the races, combined with the smoothness of the CeramicSpeed Balls results in virtually no wear on the bearing. The unique coating is a metallic layer that covers the bearing races and makes them 75% harder than steel. Thanks to this, they are highly resistant to corrosion and the coating provides an even lower friction than our standard bearings. Even if the bearing is contaminated with degreaser, water or mud, the risk of bearing failure due to corrosion is negligible if you choose the coated version.Longetivity comparison diagram: see HEREWithin comprehensive research and development program, the special coating has been developed in cooperation with a European coating specialist. Applied to the bearing’s steel races, through an advanced process that ensures an even, smooth and homogeneous surface, the coating formula improves even further the high quality of CeramicSpeed Bearings.Thanks to the coating’s high resistance to corrosion – even if the bearing is contaminated with degreaser, water or mud, the risk of bearing failure due to corrosion is negligible. We recommend choosing CeramicSpeed Coated Bearings for unmatched longevity and incredibly low friction.Friction comparison diagram (lower is better): see HEREMaintenance of CeramicSpeed Coated Bearings - Coated Bearings are more resistant to lack of lubrication when it comes to wear and damage on the bearing. Nonetheless, this does not mean that the need for maintenance is completely eliminated.Depending on the riding conditions it is recommended once a year to re-grease your CeramicSpeed Bearings to achieve the best performance in terms of low friction and longevity.If used in very wet or muddy conditions, maintenance might be required more often.If high pressure washer is used, please do not point jet stream to any of bearings (headset, bottom bracket, wheel hub, full suspension links) as it may wash out the grease. The kits come with CeramicSpeed oil in a 15ml dropper bottle. The bearings come with oil in them already. The oil is to keep them running smoothly.
Toote üksikasjad
Toote nimi
Litrid CeramicSpeed for SRAM 11s 1X Force 1/Rival 1/XX1/X01/CX1 off-road Titanium Coated 26 Coated (101712)
Toote kood
CER101712
Tootja
CeramicSpeed
Vöötkood
5711050002269
Arvustused toote kohta - Litrid CeramicSpeed for SRAM 11s 1X Force 1/Rival 1/XX1/X01/CX1 off-road Titanium Coated 26 Coated (101712)
Kirjuta oma arvustus

Litrid CeramicSpeed for SRAM 11s 1X Force 1/Rival 1/XX1/X01/CX1 off-road Titanium Coated 26 Coated (101712)

Kirjuta oma arvustus